| Which chip will I get?
We optimize the chip individually for every
car. That's necessary to keep all the car specific data (engine-number,
car identification-number equipment coding, gear-version,
etc.) original. UPsolute is not a company just trading with
the chips, they are all developed to meet your requirements.
That means, UPsolute can respond to your wishes. All UPsolute
Chips are developed in the headquarters in Austria to assure
the quality of our product.
How can I get an UPsolute Chip?
Please contact your nearest
UPsolute Chiptuning distributor.
We are working on a worldwide distributing
network with UPsolute Quality and Service standards. If no
company is listed for your country, please e-mail us, or feel
free to call us at +43 2253/880999. Together we will find
the best solution.
Installation
Depending on the car, for
a full optimization, 2 to 4 hours are needed. The following
steps are necessary:
The ECU needs to be removed.
Then the original EPROM/Flash (chip) will be removed to read
out the data. The original settings of your car will be stored
at our system.
Now the optimized settings (maps) of your car regarding torque,
power increase and fuel consumption, will be 'burned' into
a new or your existing Eprom/Flash.
After that the UPsolute chip will be inserted into the ECU
again and the ECU is ready for installation.
Now, it's on us to wait for the big grin in your face after
you return from your test drive.
|
